La Pavoni Brew Pressure Gauge. In the product’s pic gallery, you will see the old design gauge on top. All manufactured with high quality finished stainless steel, to give your la pavoni lever model a professional and stylish look.
Furthermore, since the la pavoni can only operate when the boiler is pressurized, there is no reason to measure the water temperature as this information can be obtained from the boiler pressure (measuring water temperature for pid control is only needed when the brewing temperature is below boiling as is the case with most pid machines). Capable of preparing 16 cups of coffee with a reliable 1.6l boiler, it’s made largely from cast brass. In the product’s pic gallery, you will see the old design gauge on top.
It has a highly polished body reflecting light, a pressure gauge on top of the water level sight glass, and a lever protruding from the front. This full pressure kit is entirely made of stainless steel 304 (including the piston which also has brand new sili This pressure is set by a pressure stat device under the machine which turns on and off the heating element/s.
Picture no 3 provides the actual design we send right now to our customers. Higher steam and hot water performances, with independent boiler controlled by pid system. I explain this much more precisely in the following articulation.
All manufactured with high quality finished stainless steel, to give your la pavoni lever model a professional and stylish look. The pavoni europiccola is a slightly smaller coffee machine than the other two (0.8 litres). The threads on this adapter fitting measure 12 mm od.
Please select an item from the list. Take your la pavoni lever machine to next level with the coffee sensor piston pressure kit. Humans have been structured in a way that when they see beauty, they get lost in awe.
Please pay attention to the measuring scale (bar/psi), body diameter, fitting size (bsp), and, in the case of double gauges, fitting position (top to bottom, left to right), etc. The pressure gauge is set to shut down at 0.4bar(so no steaming really, but i dont drink milk coffee) so the temp is about correct. The threads on this cap fitting measure 10.9 mm od.
Comments
Post a Comment